EVMS-K
Vertical multistage
Vertical multistage surface pump in AISI 304 steel (EVMS), in AISI 316L (EVMSL) or in cast iron (EVMSG) complete with integrated E-SPD frequency converter.
On the one hand the highly innovative technology of the EBARA EVMS with patented Shurricane® impeller and on the other hand E-SPD, the air cooled inverter, capable of varying the speed continuously and operating on any working point, consequently optimising performances and consumption according to the system’s requirements.
For further technical information see the Databook.
Fields of application
- Water supply for distribution networks related to the building service sector
- Water supply for industry in general
- Irrigation
TECHNICAL DATA
Nominal flow rate [m3/h]
1, 3, 5, 10, 15, 20
Max. operating pressure [bar]
16/25 for EVMS 1-3-5
16 for 10-15-20
Liquid temperature
From 0ºC a +80ºC
Motor
ETM, 0.75 to 4 kW
Inverter voltage
Single-phase 230V up to 2.2 kW
Three-phase 400V up to 4 kW
E-SPD
Control systems and panels
E-SPD is an air-cooled inverter, which can be installed directly on the terminal box, designed to control the start and stop of the pump based on the setpoint of the system pressure. It offers high energy savings and reduced noise levels, along with operating costs. It can be used in residential applications as it conforms to Directive EN 61800-3 Category C2.
TECHNICAL FEATURES
- The inverter installation is user friendly with quick set up which ensures a fast and effective start up.
- It can be adapted to all centrifugal pumps, both horizontal and vertical
- The LCD display allows effective management of all system parameters, including a back-up history
- The E-SPD can protect the system against overpressure, over current, voltage fluctuation, dry running and water leak
- The E-SPD comes equipped with 2 digital inputs and 2 relay outputs in addition to pressure transducer input (4-20 mA).
- The E-SPD is also RS485 compliant which enables connection of up to 8 inverters
TECHNICAL DATA
- Main supply: single-phase 230V, three-phase 400V;
- Motor output (pump): three-phase 230V/400V;
- Output current: 11A;
- Frequency: 50-60 Hz (+/- 2%);
- Max ambient temperature: 40°C;
- Insulation class: F;
- Protection degree: IP55
CDA
Surface
DUAL IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron
CDA centrifugal electric pumps are cast iron electric pumps fitted with a double impeller to allow them to expand their performance while maintaining compact dimensions. The pump body is in cast iron, they mount a mechanical seal in Ceramic/Carbon/NBR. The impeller is made of PPE + PS reinforced with glass fibres for CDA models 0.75 – 1.00, while the rest of the range is equipped with a brass impeller. Among the technical specifications are noted the AISI 303 steel shaft for CDA models 0.75 – 1.00 – 1.50 – 2.00 – 3.00, in AISI 304 steel for CDA models 4.00 – 5.50. CDA models 0.75 – 1.00 have an aluminium support, while the rest of the range is equipped with cast iron supports. The motors are asynchronous 2-pole self-ventilated, high energy efficiency IE3 starting from powers of 0.75 kW.
PUMP TECHNICAL DATA
- Total head from 17 to 76.5 m
- Capacity from 1.2 to 12.6 m3/h
- Maximum operating pressure:
- 6 bar for CDA 0.75 – 1.00
- 10 bar for the rest of the range
- Maximum liquid temperature:
- 40°C for CDA 0.75 – 1.00
- 90°C for the rest of the range
2CDX(L)
Surface
Twin impeller centrifugal electric pumps with hydraulic in AISI 304 and AISI 316
2CDX(L) are surface centrifugal electric pumps with double radial impeller, with the hydraulics completely in molded AISI 304 or AISI 316 (version L), whose components are obtained through the hydroforming process, which guarantees strength, hydraulic efficiency and reliability. 2CDX(L) model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general. The double impeller makes it possible to expand the performance range with respect to the single impeller version. The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.
PUMP TECHNICAL DATA
- Total head from 71.5 to 27 m
- Flow rate 1.2 to 12.6 m3/h
- IE3 high efficiency motors starting from 0.75 kW
- Liquid temperature -5°C ÷ +60°C (from -15°C to +110°C for H, HS, HW and HSW versions)
3-3L SERIES_2-4 POLES
Centrifugal pumps close coupled and standardized
Standardised single-stage centrifugal pumps (EN 733)
Click here to connect with BIM area
TECHNICAL FEATURES
- Available with various special sealing systems
- Impeller hydraulically balanced to prevent axial thrusts against the seal, it achieves 80% efficiency.
- Made of stainless steel AISI 304
- Back pull-out design : it allows removal of the motor, the coupling, the cantilever support and the impeller without compromising the housing of the pump body or removing the pipes.
LIQUID TEMPERATURE RANGE
from -10°C to + 90°C for the standard version
from -20°C to + 120°C for the special versions
MAXIMUM WORKING PRESSURE
10 bar
MATERIALS AVAILABLE
Stainless steel AISI 304 for 3 SERIES
Stainless steel AISI 316 for 3L SERIES
Micro-cast stainless steel AISI 316 for the 3L SERIES 65-250, 3L SERIES 80
REGULATION
It complies with regulations ErP 547/2012 (index MEI > 0.4), 640/2009 (motors in IE3 efficiency class) EN 733
“Z version” : with adjustable foot
3D SERIES
Centrifugal pumps close coupled and standardized
Standardised single-stage centrifugal pumps (EN 733)
Click here to connect with BIM area
TECHNICAL FEATURES
- Available with various special sealing systems
- Impeller hydraulically balanced to prevent axial thrusts against the seal, it achieves 80% efficiency.
- Made of stainless steel AISI 304 for 3D SERIES and AISI 316 for 3D 65
- Back pull-out design : it allows removal of the motor, the coupling, the cantilever support and the impeller without compromising the housing of the pump body or removing the pipes.
LIQUID TEMPERATURE RANGE
from -10°C to + 90°C for the standard version
from -20°C to + 120°C for the special versions
MAXIMUM WORKING PRESSURE
10 bar
MATERIALS AVAILABLE
Cast iron
REGULATION
It complies with regulations ErP 547/2012 (index MEI > 0.4), 640/2009 (motors in IE3 efficiency class) EN 733
CD
Surface
SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH HYDRAULICS IN AISI 304
CD are surface centrifugal electric pumps entirely made of AISI 304 stainless steel.
CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.
PUMP TECHNICAL DATA
- Liquid temperature:
- 5°C ÷ +60°C (from -15°C to +110°C for H, HS, HW and HSW versions)
- Total head from 36.8 to 12.5 m
- Flow rate 1.2 to 15 m3/h
- Hydraulic efficiency index MEI > 0.4
- IE3 high efficiency motors starting from 0.75kW
CDX(L)
Surface
Single impeller centrifugal electric pumps with hydraulics in AISI 304 and AISI 316
CDX(L) are surface centrifugal electric pumps with radial impeller, with hydraulics completely in molded AISI 304 or AISI 316 (version L), whose components are obtained through the hydroforming process, which guarantees strength, hydraulic efficiency and reliability.
CDX(L) model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.
PUMP TECHNICAL DATA
- Liquid temperature:
- 5°C ÷ +60°C (from -15°C to +110°C for H, HS, HW and HSW versions)
- Total head from 36.8 to 12.5 m
- Flow rate 1.2 to 15 m3/h
- Hydraulic efficiency index MEI > 0.4
- IE3 high efficiency motors starting from 0.75kW
DWO
Surface
OPEN IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI304 stainless steel
Centrifugal surface electric pumps with molded AISI 304 body, obtained through the hydroforming process: this process exploits the water pressure to deform the material. This guarantees the highest quality standards, the drastic reduction of welding points, the ability to shape the pump body ensuring the most efficient form absolutely and the ability to work steel with high thickness ensuring maximum construction strength. It mounts the open radial flow impeller, which makes it suitable for pumping liquids that are not completely clean, but with solid parts up to 19 mm in diameter: this is the case of machinery such as washers, car washes, industrial dishwashers to name but a few. The standard mechanical seal is in Ceramic/Carbon/NBR, and are then available in the version with special seals.
PUMP TECHNICAL DATA
- Total head from 17.5 to 5.1 m
- Capacity from 6 to 66 m3/h
- IE3 high efficiency motors starting from 0.75 kW
- Liquid temperature: from -5°C to +90°C (from -15°C to +110°C for H, HS, HW and HSW versions)
- Liquid with solids up to 19 mm in diameter
DWC
Surface
CLOSED IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304 stainless steel
Centrifugal surface electric pumps with molded AISI 304 body, obtained through the hydroforming process: this process exploits the water pressure to deform the material. This guarantees the highest quality standards, the drastic reduction of welding points, the ability to shape the pump body ensuring the most efficient form absolutely and the ability to work steel with high thickness ensuring maximum construction strength. It mounts the closed radial flow impeller, and is available both with threaded connections (DWC-N), and with Victaulic connections (DWC-V) that make it suitable for installations in chillers or in hydronic groups. The standard mechanical seal is made of Ceramic/Carbon/EPDM, but the product is available with special seals for harder applications and higher liquid temperature limits.
PUMP TECHNICAL DATA
- Total head from 25 to 6.2 m
- Capacity from 6 to 45 m3/h
- IE3 high efficiency motors starting from 0.75 kW
- Liquid temperature: from -15°C to +90°C (from -15°C to +110°C for H, HS, HW and HSW versions)
- Threaded or Victaulic connections
MODEL GS
Centrifugal pumps close coupled and standardized
NORMALIZED CENTRIFUGAL ELECTRIC PUMPS according to EN 733 in cast iron
APPLICATIONS
- Food industry
- Paper industry
- Automotive industry
- Steel industry-Not ferrous metal industry
- Garbage incineration and cooling towers
- Pressurization and washing systems
- Semiconductor industry
- Pressurization
- Firefighting systems
- Heating systems
- Conditioning and cooling systems
- Water supply for municipal services
- Irrigation
- Agriculture
- Relaunching clean water
- Swimming pools
- Flushes
TECHNICAL DETAILS
- Highly resistant construction
- Possibility of use in fire-fighting systems
- Can be inserted in complex machinery for industrial use
- High efficiency
PUMP TECHNICAL DATA
- Maximum working pressure: 16 bar
- Temperature of the liquid: -10°C ÷ +120°C
- MEI > 0,6
For further information please see our Data Book
MOTOR TECHNICAL DATA
- High efficiency IE3 motors starting from 0,75kW to 355 KW.
- Self-ventilated 2 and 4 poles asynchronous motor
- Insulation class F
- Protection degree IP 55
- Voltage:3~230/400V ±10%, 50Hz
- Protection is user’s responsibility
MATERIALS
- Impeller in :cast iron, spheroidal cast iron and bronze
- Pump casing in cast iron
- Shaft in AISI 431
- Mechanical seal in in SiC/Carbon/EPDM or gland packing in Silicone carbide fiber
EVMS SERIES
Vertical multistage
PRODUCT
Nominal flow rate [m3/h]:
1, 3, 5, 10, 15, 20, 32, 45, 64, 90
Maximum total head [m]:
320 (depending on models)
Model
in AISI 304: EVMS
in AISI 316L *: EVMSL
in Cast iron: EVMSG
* AISI 316 is used for some parts.
APPLICATIONS
Industry
e.g. water treatment, boiler feeding, wash and clean, chilling, machine tooling, pressure boosting, food & beverage, pharmaceutical industries, marine applications
Building service
e.g. pressure boosting, sprinkler systems, firefighting systems, district heating, heat exchanger/fan heaters, air conditioning systems, heating systems
Water supply
e.g. water treatment, pressure boosting, irrigation, agriculture
TECHNICAL FEATURES
- Innovative hydraulic solution “Shurricane” for EVMS
- Any motor, anywhere
- Various pipe connections
- Easy maintenance for mechanical seal replacement
- Drinking water use approval with DM174, ACS, KTW , PZH for EVMS
PUMP TECHNICAL DATA
Maximum working pressure [bar]:
16, 25, 30, 35 (depending on models)
Maximum liquid temperature range [℃]:
-30°C ÷ +140°C
MEI
>0.7
MOTOR TECHNICAL DATA
Frequency:
50 Hz, 60Hz
Efficiency level:
IE3 ≥ 0,75 kW for 50Hz
Poles
2
Phase x voltage:
1 x 230V ±10% 50Hz (≤ 2.2 kW)
3 x 230/400V ±10% (≤ 4 kW),
3 x 400/690V ±10% (≥ 5.5 kW)
Protection degree:
IP55
Insulation class:
F
MATERIALS
AISI304 version:
Pump bottom casing in AISI304, hydraulic parts in AISI304, Motor bracket in cast iron
AISI316 version:
Pump bottom casing in AISI316, hydraulic parts in AISI316, Motor bracket in cast iron
Cast iron version:
Pump bottom casing in cast iron, hydraulic parts in AISI304, Motor bracket in cast iron
Shaft sleeve bearings:
Tungsten carbide
Liner ring:
PPS
O rings:
EPDM or FPM
Shaft seal:
Cartridge mechanical seal as standard
SiC/Carbon EPDM and you can choose other options
For further information please see our Data Book
MATRIX
Horizontal multistage
HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304
Characterised by a sturdy and compact construction. Available in various versions and models and suitable for many applications: pressure groups, water distribution and treatment, heating and air conditioning, cooling and chiller, irrigation and rainwater recovery, industrial washing and industrial systems.
- Body, impellers, intermediate stages, seal holder disc and shaft (part in contact with the liquid) in AISI 304.
- The standard mechanical seal is in Ceramic/Carbon/EPDM; then there is the possibility of using different types of special seals to reach a temperature range from -15°C to +110°C
- WRAS-certified for standard models up to 85°C.
- It is possible to combine these pumps with 2 poles, self-ventilated, high efficiency asynchronous motors
PUMP TECHNICAL DATA
- Total head up to 97 m
- Capacity up to 27 m3/h
- IE3 high efficiency motors starting from 0.75 kW
- Maximum liquid temperature
- from -15°C to +85°C (standard)
- from -15°C to +110°C (TE version for high temperatures)
Available, as an accessory, the insulation casing for the pump body for use with coolant liquids or in situations where condensation may occur.
MD-MMD
End suction close coupled
Cast iron monoblock centrifugal pumps conforming to EN 733.
APPLICATIONS
- Handling of clean water for civil, agricultural, industrial uses and for pressurisation units, heating plants and air conditioning plants
- Irrigation in farming companies
- Sports facilities
- Washing plants
TECHNICAL FEATURES
- Available with various special sealing systems
- Impeller hydraulically balanced to prevent axial thrusts against the seal, it achieves 80% efficiency.
- Made of stainless steel AISI 304 for MD, in cast iron for the MMD.
- Back pull-out design
PUMP SPECIFICATIONS
- Temperature of the liquid:
- -5°C ÷ +90°C (MD)
- -5°C ÷ +110°C (MD version H-HS-HW-HSW)
- -5°C ÷ +120°C (MD version E)
- -10°C ÷ +90°C (MMD)
- Maximum operating pressure: 10 bar
- MEI > 0,7 (MD)
- MEI > 0,4 (MMD)
For further information, please consult our Data Books on the website www.ebaraeurope.com
MOTOR SPECIFICATIONS
- IE3 high energy-efficiency motors (MD-MMD)
- Insulation Class F
- Protection rating IP55
- Three-phase voltage 230/400V ±10% 50Hz up to 4 kW included, three-phase voltage 400/690V ±10% 50Hz from 5.5 kW and higher
- Protection to be arranged by the user for three-phase version
MATERIALS
- Cast iron pump body and support
- AISI 304 steel shaft – part coming into contact with liquid (MD), made of AISI 420 steel (MMD)
- Mechanical seal made of:
- Carbon/Ceramic/NBR (MD )
- SiC/SiC/NBR (MMD)
- Impeller made of:
- AISI 304 steel (MD)
- cast iron (MMD)
ACCESSORIES (On request)
- Galvanized counterflanges
SP SERIES
Control systems and panels
CONTROL PANELS WITH INVERTER
Control panels with inverter SP series modulate the operation of electro pumps responding to the pressure transducer control (measured by flow rate or other external signal 4-20 mA passive) adjusting the speed of the electric pumps to maintain constant the system demand.
VERSION
- “FC”: Control panel for one electric pump with inverter
- “EFC”: Control panel for two or more electric pumps, with single inverter but with electric pumps exchange
- “MFC”: Control panel for two or more electric pumps, with one inverter for each individual electric pump
TECHNICAL DATA
- Power supply voltage: 400V ±10%,
- Three phases without aid of the neutral
- Power supply frequency: 50Hz or 60Hz
- Power for every motor: from 0.75 kW and above
- Type of start-up and power supply for all pumps:
- during the start-up phase, the inverter powers the pump with a voltage ramp, the other pumps have direct or star/delta start-up according to the electric power
- during emergency functioning (controlled by pressure switches) all of the pumps function according to the power size at direct or delta/triangle start-up
- Limits of use (environment temperature): from -10°C to +40°C
- Protection rating:
- IP55 up to 3 kW
- IP44 for greater powers
- Conformity to the CE mark, EN 60204-1; Security electrical equipment. – EN 60439-1; Switchgear and control gear assemblies.
- EMC standards applied:
- CEI EN 61000-6-1; immunity for residential, commercial, and light industrial environments.
- CEI EN 61000-6-2; industrial immunity.
- CEI EN 61000-6-3; emission for residential, commercial and light industrial environments.
- CEI EN 61000-6-4; industrial emission.
- CEI EN 61000-3-2; harmonic current emission <= 16A (use XL.L line inductance to be installed on request, see ref. 8.1, 8.2).
- Emissions: conformity for residential environments.
- Immunity: conformity for industrial environments.
- Minimum output frequency: 30 Hz














